Measuring instructions for fly screens
Standard Door
Measuring instructions for standard doors, such as hinged patio doors.
Recess fit (Inside the frame)
Measuring the width
Measure the width between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, deducting a 2 mm margin.
Measuring the height
Measure the height between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, deducting a 2 mm margin.
Check if there is 18 mm of clearance for the screen inside the frame. If not, you may choose a 'Face fit' installation.
Ensure there is 35 mm of clearance between the frame and the door handle. A door handle that protrudes forward from the frame is not an issue, as the door will be open when the screen is in use.
Face fit (On the frame)
Measuring the width
Measure the width between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement.
Measuring the height
Measure the height at 3 different points (as shown in A, B, and C) and note the smallest measurement. Measure from the inside of the top frame down to the floor.
The screen profiles are 35 mm wide on each side. Therefore, increase the width measurement by 7 cm (2 x 35 mm). Increase the height measurement by only 3.5 cm (for the top only), as you have already measured the bottom down to the floor.
Or watch the video
Sliding Door
Measuring instructions for sliding doors / patio doors.
Recess fit (In the frame)
Measuring the width
Measure the width between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, deducting a 2 mm margin.
Measuring the height
Measure the height between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, deducting a 2 mm margin.
Check if there is 18 mm of clearance for the screen within the frame. If not, you may choose a 'Face fit' installation.
Face fit (On the frame)
Measuring the width
Measure the width between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement.
Measuring the height
Measure the height at 3 different points (as shown in A, B, and C) and note the smallest measurement. Measure from the inside of the top frame down to the floor.
The screen profiles are 35 mm wide on each side. Therefore, increase the width measurement by 7 cm (2 x 35 mm). Increase the height measurement by only 3.5 cm (for the top only), as you have already measured the bottom down to the floor.
Or watch the video
Double Doors
Measuring instructions for double-wing doors, such as garden doors and French doors.
Recess fit (In the frame)
Measuring the width
Measure the width between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
Measuring the height
Measure the height between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
Check if there is 18 mm of clearance for the screen within the frame. If not, you may choose to install the screen 'Face fit'.
Face fit (On the frame)
Measuring the width
Measure the width between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement.
Measuring the height
Measure the height at 3 different points (as shown in A, B, and C) and note the smallest measurement. Measure from the inside of the top frame down to the floor.
The screen profiles are 35 mm wide on each side. Therefore, increase the width measurement by 7 cm (2 x 35 mm). Increase the height measurement by only 3.5 cm (for the top), as the bottom is already measured to the floor.
Or watch the video
Skylights / Roof Window
Measuring instructions for all types of skylights, including Velux windows.
Recess fit (In the frame)
Measuring the width
Measure the width between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
Measuring the height
Measure the height between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
Check if there is 18 mm of clearance for the screen within the frame. If not, you may choose to install the screen 'Face fit'.
Face fit (On the frame)
Measuring the width
Measure the width between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
Measuring the height
Measure the height between the frames at 3 different points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
The screen profiles are 35 mm wide on each side. Therefore, increase the width measurement by 7 cm and the height measurement by 7 cm as well (2 x 35 mm).
Windows
Measuring instructions for windows.
Recess fit (In the frame)
Measuring the width
Measure the width between the frames at 3 points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
Measuring the height
Measure the height between the frames at 3 points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
Check if there is 18 mm of clearance for the screen within the frame. If not, check below if you can install the screen 'Face fit'.
Face fit (On the frame)
Measuring the width
Measure the width between the frames at 3 points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
Measuring the height
Measure the height between the frames at 3 points (as shown in A, B, and C) and note the smallest measurement, minus a 2 mm margin.
The screen profiles are 35 mm wide on each side. Therefore, increase the width measurement by 7 cm and the height measurement by 7 cm as well (2 x 35 mm).